Configuring Keyboards, ver. 0.8

You need one or moreMIDI keyboards to really play the Miditzer
Post Reply
Organmarine
Groupie
Posts: 42
Joined: Wed Jan 02, 2013 1:42 am
Spam Stopper: theatre organ
How many Style 216 did Wurlitzer make?: 12

Re: Configuring Keyboards, ver. 0.8

Post by Organmarine » Thu Jan 03, 2013 10:44 am

It seems I am replying to a posting in 2005. Don't know how this works.

I would like to ask how to configure the Miditzer together with my Technics GA3?

Can't get it to work.

Happy New Year and lots of hopefulness & happiness.

Organmarine.

User avatar
greenfox
Posts: 1172
Joined: Sun Jan 29, 2006 6:16 am
How many Style 216 did Wurlitzer make?: 0
Location: Australia
Contact:

Re: Configuring Keyboards, ver. 0.8

Post by greenfox » Sun Jan 06, 2013 4:51 am

There is no doubt your organ will work with Miditzer. This informaton has been given over and over on this forum.

First you need to learn how to view and understand the simple basics of MIDI messages. From this point you will easily see what messages your organ is producing and what settings you need to adjust in Miditzer.

If you search this forum on Technics, you will find many posts relating to setting them up.

If you search MIDI-OX you will find a useful tool to view the otherwise invisable MIDI messages you need to learn about.

If you search on "Simple MIDI for Virtual Organ" you will find detailed information on how to interperet MIDI messages in this context.

I apologise I am responding from an Android Pad and am unable to provide pasted links to the informtion I am referring to.

Regard
Rick
Rick
From: Brisbane Queensland Australia

User avatar
greenfox
Posts: 1172
Joined: Sun Jan 29, 2006 6:16 am
How many Style 216 did Wurlitzer make?: 0
Location: Australia
Contact:

Re: Configuring Keyboards, ver. 0.8

Post by greenfox » Sun Jan 06, 2013 6:36 pm

(Back on a proper computer now!)

This link below will be very useful in getting yourself acquainted with the few simple aspects of MIDI needed for virtual organ setups. Understanding this early in your virtual organ journey will give you plenty of confidence to progress.

http://www.tosa-qld.org/VTPO/docs/Simpl ... _Organ.pdf

Regards
Rick
Rick
From: Brisbane Queensland Australia

User avatar
StentorVox
Posts: 121
Joined: Sun Oct 19, 2008 12:19 pm
How many Style 216 did Wurlitzer make?: 0
Contact:

KORG SP100 MIDI keyboard won't play

Post by StentorVox » Sun Jan 21, 2018 9:49 pm

Hello,
I have several keyboards connected to play the MidiTzer.
They all work super.
I got a KORG SP100 MIDI piano that will not play.
Help!

User avatar
Jim Henry
Admin Group
Posts: 6121
Joined: Mon May 23, 2005 11:44 pm
Spam Stopper: theatre organ
How many Style 216 did Wurlitzer make?: 12
Location: United States

Re: Configuring Keyboards, ver. 0.8

Post by Jim Henry » Mon Jan 22, 2018 12:45 am

Have you looked at the output with MIDI-OX?
Jim Henry

User avatar
StentorVox
Posts: 121
Joined: Sun Oct 19, 2008 12:19 pm
How many Style 216 did Wurlitzer make?: 0
Contact:

Re: Configuring Keyboards, ver. 0.8

Post by StentorVox » Mon Jan 22, 2018 7:00 pm

Well I located the connection.

I figured the keyboard may possibly send only to the channel 1, and I have it always set on the "settings" screen (at the little top left yellow MidiTzer "M" button) as suggested by Jim to "solo = channel 3."

I re-set the input selection that was set to SOLO on channel 3 to 1 and now it recognizes the signal.

I have several Workstation M-61 keyboards that always boot up to channel 1; they are dumb MIDI keyboards, but do have a display window.

This KORG 88-key MIDI manual does not have a visible display, but I thought about that, so re-set my MidiTzer settings for the solo manual to channel 1 instead of 3, and it worketh! Yeah!

I did not change channel 1 of the GREAT manual to something else.
So the GREAT still plays from the Baldwin MIDI just the same as before.

The Baldwin MIDI output still plays into MidiTzer GREAT on channel 1 and so does this KORG piano keyboard
(However, the Baldwin plays all its signals into SOUNDCARD 1 and the KORG plays into SOUNDCARD 2)

BALDWIN MIDI OUT from organ console:
Soundcard 1 input:
GREAT - Channel 1
Accomp - Channel 2
PEDAL - Channel 4
AUX - Channel 1

KORG MIDI OUT from 88-key piano
Soundcard 2 input:
SOLO - channel 1

The MidiTzer is AWESOME!

P. S.
Now I will go to settings: MIDI OUTPUT (the little yellow "M") to see about altering the piano soundfont (synth 2, channel 12) for the piano channel to play thru the KORG piano input itself instead of into the current soundcard speaker amplifier.
This will enable a pianist to accompany from the baby grand piano as part of the MIDITZER panoply and free up another soundcard amp output to devote to another sf2 soundfont).

pk
Thanx for you help, guys

User avatar
Jim Henry
Admin Group
Posts: 6121
Joined: Mon May 23, 2005 11:44 pm
Spam Stopper: theatre organ
How many Style 216 did Wurlitzer make?: 12
Location: United States

Re: Configuring Keyboards, ver. 0.8

Post by Jim Henry » Mon Jan 22, 2018 9:03 pm

Glad you got things sorted out.

If you want to be sneaky, you might be able to find a way to enable and disable the Korg piano at the Korg end so you can play the piano without using a Miditzer stop. Of course that would be at the expense of not being able to control the piano with the combination action. Or use couplers. But you would you would gain a touch sensitive piano.

For the benefit of lurkers: The Miditzer uses the MIDI Channel and the MIDI Input Device to identify a keyboard. If you have individual keyboards, each on a different MIDI Input Device, they can all use MIDI Channel 1, which is convenient because a lot of MIDI keyboard always power up set to MIDI Channel 1.
Jim Henry

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests